Metal Processing Equipment Manufacturer for Peeling, Grinding, Cutting and Pickling Lines

ZLCZ series slag remover is mainly applicable to the cleaning of metal and non-metal debris, sludge, etc. in the water tank of the machine tool. The main components of the machine include inlet and outlet pipe parts, filter barrel parts, water pump parts and box parts. The mixture of cutting fluid and metal debris is sucked into the filter barrel through the water inlet of the water pump, and the cutting fluid filtered by the filter screen is sent back to the cutting fluid pool, and the purpose of removing debris and debris is achieved by circulating filtration. This machine is plug free, the quick connector is plug and play, the machine tool is free of shut down, and can be cleaned at any time.

ZLYB series float ball level alarm is mainly used to control the level of liquid. When the level reaches the upper and lower switching values, the proximity switch sends out a signal to control the start and stop of the water pump. The device has the advantages of convenient installation and high reliability. The alarm point can be adjusted manually and set freely.

The ZLFS series iron chip crusher is a professional machine for crushing large metal chips to the required size. The cutter head of the pulverizer is made of high anti-wear material, and the blades are arranged in a spiral shape. It has the functions of tearing, extruding, and biting. This equipment can be controlled by PLC programming, and has the functions of automatic detection and overload protection. The iron chip crusher can effectively reduce the volume of chips, smash the long, roll and round chips discharged from the machine tool, facilitate transportation, and also serve as the front of various centralized transportation such as chip separation and drying, crushing, pump transportation, and air transportation.

The twin-shaft shredder is a shredding machine designed for low-speed, high-torque shearing. It is particularly suitable for shredding large metal pieces, lumpy materials, or oversized materials packed into bales. The unit consists of two shafts with blades arranged in a spiral pattern; a gear motor drives the two shafts to rotate, and the materials are shredded through mutual shearing and pulling. This equipment features PLC programmable control and includes functions such as automatic overload detection and protection.

The vertical iron chip crusher has the functions of main shaft monitoring and foreign matter ejection. When foreign matter enters the crusher and causes the main shaft to jam, the control system will send a signal to cut off the source input. The active shaft of the crusher will automatically reverse and eject the foreign matter. The active shaft of the metal crusher completes the ejection of foreign matter through the set jamming procedure, and the foreign matter ejection port is automatically closed. If the metal crusher exceeds the set jamming frequency, the metal chip crusher will automatically stop and alarm.

ZLTY series chip dryer is mainly used for separating the oil -chips from machine tools(like gear-cutting machines and gun-drills) using expensive coolant (cutting oil) as coolant. Oil-chips drop into the rotary drum of the dryer through a conveying device, and metal filings with coolant (cutting oil) are dried by the action of high-speed centrifugal force, so as to separate oil from the chips. It has a separating load of 100–1000 kg/h, with a drying rate ≥95%. The recycled liquid can be reused, thus making it economical and environmentally friendly.